The publication is licensed under a Creative Commons Attribution 4.0 International License (CC BY)
Copyright 2018 All Rights Reserved: UR Publishers
Unique Research Publishers,
Flat NO 301 Sumanth Sai Emrald,
Srinivasa Nagar Colony, Nizampet,
Bachupally,Medchal (Malkajgiri),
Hyderabad, Telangana-500090, India
Email:   |
Country wise Visitors

ISSN (online) : 2581-4311

International Journal of Current Research in Science, Engineering & Technology provides a platform for researcher to rapidly disseminate their significant research in various streams of Science, Engineering and technology. The journal publishes original research articles, review articles, mini-review articles, short communications and case reports.  All types of the manuscript should be prepared in English and submitted as "MS Word". The manuscripts should be typed double spaced with 1cm margin on all sides of the A4 paper. The Title font size should be of 14pt and the main script should be of 12pt. Scientific names of all plant and microorganisms must be in Italic fonts. The following sections should be followed for Original Articles: Title page, Abstract, Key words, Text, Acknowledgement (if any), Conflict of Interest (if any) and References. For proper review and fast publication all manuscript should be grammatically corrected prior to submission.
Title Page: Title page should include paper title, author(s) full name and affiliation, corresponding author(s) names complete affiliation/address, along with phone, fax and email.
Title: The title of the article should not be more than 120 characters. Authors should take care that the title to be brief and precise.
Abstract: The abstract should not exceed 250 words and should be summarizing the essential features of the article.
Keywords: Provide 5 to 7 keywords in alphabetical order.

Text Organization
The main text should begin on a separate page and should be divided into title page, abstract and the main text. The Text portion for Original articles manuscripts should contain the following sections: Introduction, Methodology, Results, Discussion (or Results and Discussion), Conclusions, References, Figures (if any), Tables (if any) and Graphs (if any). which should be followed by the Conflict of Interest, Acknowledgements and Reference section. The manuscript style must be uniform throughout the text and 12 pt Times New Roman fonts should be used. The full term for an abbreviation should precede its first appearance in the text unless it is a standard unit of measurement. The reference numbers should be given in square brackets in the text. Italics should be used for Scientific name of organisms (Genus and Species), for emphasis and for unfamiliar words or phrases. Non-assimilated words from Latin or other languages should also be italicized e.g. per se, et al. etc.
All kinds of measurements should be reported only in International System of Units (SI).

In this section anyone (individual/company/institution) who has substantially contributed to the study for important intellectual content, or who was involved in the article's drafting or revising must also be acknowledged. The authors can acknowledge the help of individuals, Funding agencies and significant contributors of their research by the authors. This should not be more than 50 words.

Conflict of Interest
Financial contributions to the work being reported must be clearly acknowledged, as should any potential conflict of interest under the heading 'Conflict of Interest'. The Authors can express their conflicts (if any). Or the authors should give it as "The Authors have no Conflict of interest".

References must be listed in the Vancouver Style. All references should be numbered sequentially in square brackets [ ] in the text and listed in the same order in the reference section. References should number no more than 30.

Journal references
Xiaohu R, Huiging FA, Yuwei Z and Zhiyong L. title of article, Acs Appl. Mater. Interfaces, 2016; 8(39), pp 26190-26197.
Fontana M, Frisch S, Glaz SA et al. Rings, Polynomials, and Modules. Germany; Springer Proceedings in Mathematics & Statistics: 2016: pp. 14-33.
Simon, O, Vahjen, W, Scharek L. US Patent, US 6291319, 2006.

Tables and Figures
Tables, Graphs and figures should be given at the end of the manuscript under separate headings. Each table should be titled, typed on separate sheets in consecutive order using Arabic numerals. Indicate SI units of measure in parentheses. The Figures must be clear and sharp. Digital files are recommended for highest quality reproduction and should follow the following guidelines
  • 300dpi or higher sized to fit journal page
  • JPEG and TIFF formats are preferred
  • Source (if any)

Mini-reviews are brief summaries (limit of 8 pages) of developments in fast-moving areas of Science and Technology. Mini-reviews are subjected to editorial review. There is no prescribed layout for Mini-reviews, but the tables, and manner of citations should conform to the guidelines for regular research articles. However, references should number no more than 45.

Review Articles
Critical Reviews of the current state of knowledge regarding any aspect of Science, Engineering and Technology are preferred.  Reviews should be divided into sections with appropriate headings. The format of the References section is identical to that of Original research Articles. While there is no limitation on the length of a Review, it is recommended that a standard Review comprises no more than the equivalent of 12 printed journal pages, including display items and references. References should number no more than 80. If, for a particular reason, an author wishes to exceed or diverge from these guidelines significantly, they should contact the Managing Editor ( before submitting a manuscript. Unsolicited reviews will be considered but are subject to the approval of the Editor-in-Chief and will be accepted only under special circumstances. Reviews will be subjected to an independent peer review, and the Editor-in-Chief may request changes or decide not to proceed with publication

Manuscript Sumission
Authors must submit a manuscript to the Chief-Editors through the Journal website (http://www. All text, including tables and figures should be submitted in word processing documents, preferably in Microsoft Word file (.doc/.docx). However, the Figures in JPEG format will be requested from the authors after successful acceptance of the article for publications.
Also, the manuscripts can be emailed to;

Review Process
The submitted manuscripts are peer reviewed by panel of experts and a double blind review process. The author's informations are not disclosed to the reviewer's and the reviewer's details are not disclosed to Authors. The acceptance of the manuscripts for the publication will be based on Originality of the research, significance and technical methodology. The decision of the editor will be final on the decision for the acceptance of the manuscript for publication. The accepted manuscripts for the publication will be formatted into journals format and sent to the author for their final editing before publishing online.

Correcting Proofs
The Galley proofs would be sent to the corresponding authors for correction. Only typesetting errors may be corrected; changes in, or additions to, the accepted manuscript will be not be allowed. The corresponding author is responsible to return the galley proof without delay (if any). The authors are responsible for the contents appeared in their published manuscripts.

Article Processing Charges
        International Journal of Current Research in Science, Engineering & Technology is an open access Journal publishing scholarly journals that provides immediate, worldwide access to the full-text of all published articles. Open access allows all interested readers to view, download, print, and redistribute any article without a subscription, enabling far greater distribution of an author's work . Most of the authors from various fields realizes that benefit of open access publishing provides the increase in citation of thier articles which greatly increases the impact of their work.
        The publication costs of an article are paid from an author's research budget, or by their supporting institution, in the form of Article Processing Charges. These Article Processing Charges allow publishers to make the full-text of every published article freely available to all interested readers. In addition, authors who publish in our open access journals retain the copyright of their work, which enables the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
        Publishing an article in International Journal of Advances in Interdisciplinary Research requires Article Processing Charges of Rs. 3000/- (INR) or $80 US dollar that will be billed to the submitting author upon acceptance of the article for publication. Anyhow the Individual waiver requests upto to 50% can be considered on a case-by-case basis and may be granted. To apply for a waiver please request during Article submission. A decision on the waiver will normally be made within one working day and the Manuscript ID can be informed on the same working days.

The authors are requested to submit covering letter during the submission of manuscripts. All the authors of the manuscript are required to sign CTA (Copy Right Transfer Agreement) Form and send it back to the publisher up on acceptance of their manuscript for publication. The scanned copy of CTA forms can be sent as an attachment file to the

Author Guidelines